Royal Alpha 583cx Instruction Manual Download

Page: 93 / 139

Alpha 583cx User’s Guide

PE Printer Error

For example, if the last position you were in was REG, turn the key to
the REG position and press the

Clear

key and then press the

Amount

Tend Total

Check

, or

Charge

key to complete a sale. If your last

position was PRG, turn the key to the PRG position and press the

Clear

key.

If the last thing you were doing was programming PLUs in the PRG
mode, return the PRG key to the PRG position. Press

Clear

and then

press

Qty/Date

to leave PLU programming mode.

Repeat the procedure you are trying to perform.

• If error still persists, perform a Half System Clear procedure. See Half

System Clear on page 89.

• As a last resort, perform a Full System Clear procedure. See Full

System Clear on page 89.

Sec

code error appears in PRG, X OR Z modes

This prompt means a Manager Password is programmed.

▼

Enter the password number and press

Check

Clerk E12

Displays In REG 1 or REG 2 Modes

This prompt means clerk numbers are programmed.

Enter the clerk number and press

Clerk

Enter the password and press

Charge

Printer Error

This prompt means there is a paper problem.

Check if you are out of paper.

Check for a paper jam. If so, carefully remove any paper obstructing the
printer.

Check and make sure the paper was aligned properly in the printer and
that the printer bar is snapped into place.

Caution

Do not manually pull the paper. Always use the

Feed

key to remove or

advance the paper. Do not use sharp or pointed instruments in the printer
area. This can seriously damage the printer.

After the paper jam is successfully removed, if PE still appears, turn the
Mode key to the OFF position. Unplug the cash register, wait 10 seconds,
and plug it back in.

Summary of Contents for Alpha 583cx












































































































































Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands

Royal Alpha 583cx, Instruction Manual

Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands