Alpha 583cx User’s Guide
23
Setting Alphanumeric Descriptions
Note
If you enter the wrong character, press the
Void
key to backspace and delete
that character and then continue.
To program your logo
1
Put the PRG key in the Mode key slot and turn it to the PRG position.
2
If you are prompted for a Manager Password, type the password number
and then press the
Check
key. If you did not program a Manager
Password, go to the next step.
3
For the 1st line, do the following:
• Using the round Number keys area, press
31
.
• Press the
Return
key. The Logo line 1 appears on the display.
• Enter the 1st line of the logo, up to 24 characters and then press the
Check
key.
4
If you want a 2nd line, do the following:
• Using the round Number keys area, press
32
.
• Press the
Return
key. Logo line 2 appears on the display.
• Enter the 2nd line of the logo, up to 24 characters and then press the
Check
key.
5
If you want a 3rd line, do the following:
• Using the round Number keys area, press
33
.
• Press the
Return
key. Logo line 3 appears on the display.
• Enter the 3rd line of the logo, up to 24 characters and then press the
Check
key.
6
If you want a 4th line, do the following:
• Using the round Number keys area, press
34
.
• Press the
Return
key. Logo line 4 appears on the display.
• Enter the 4th line of the logo, up to 24 characters and then press the
Check
key.
7
If you want a 5th line, do the following:
• Using the round Number keys area, press
35
.
• Press the
Return
key. Logo line 5 appears on the display.
• Enter the 5th line of the logo, up to 24 characters and then press the
Check
key.
8
When you are done, turn the Mode key to Off.