Royal Alpha 583cx Instruction Manual Download

Page: 118 / 139

Chapter 11: Examples

112

Alpha 583cx User’s Guide

Voiding a Plu Sale with a Minus Percentage Discount

Example 64:

Assume PLU #1 is preset for the price of $1.00 in Department 1

and the

key is pre-programmed for 10%. Ring up PLU #1, deduct 10%,

then void this entry.

To void a PLU sale with a minus percentage discount

In the Number keys area, press

, press the

key, and then press

the

key, and the

key.

Press

the

key.

If the Minus Percentage Discount is not pre-programmed, type the

discount rate before pressing the

key.

Press the

key.

Voiding a PLU Sale with a Plus Percentage Rate

Example 65:

Assume PLU #1 is preset for the price of $1.00 in Department 1

and the [+%/PO] key is pre-programmed for 10%. Ring up PLU #1, add 10%,
then void this entry.

To void a PLU sale with a PLUs percentage rate

In the Number keys area, press

, press the

key, and then press

the

key, and the

key.

Press the

key.

If the Plus Percentage Rate is not pre-programmed, type in the discount
rate before pressing the

key.

Press the

key.

Summary of Contents for Alpha 583cx












































































































































Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands

Royal Alpha 583cx, Instruction Manual

Search results

Summary of Contents for Alpha 583cx

Reviews:

Related manuals for Alpha 583cx

Brands by name

Popular brands