98
them.
Force USB-2.0: Activate the USB 2.0 mode of the scanner.
Correction scale factor (length)
: If you want to scan special originals which are particularly
light or heavy and find out that the scale in feed direction is not exact, you can define a
correction factor here. But normally you should not make any modifications. Enter a
value of more than 1.0 if the scanned documents are too short.
Language
: Here you can change the system language.
Reduced speed
: If you scan very sensitive originals presenting a risk of being damaged
when transported through the scanner, you can transport them at a reduced speed. Here
you can select the target speed. (see 5.13.5).
Correction scale factor (length):
If this parameter is activated, you can set a correction in
y direction between 0,980 and 1.020 per mill in ROWE SCAN/COPY APP under "Expert
mode". In case of existing favorites, this parameter is to be checked for correctness and
to be saved, once.
Margin back/front/left/right
: Here you can define additional (global) settings for the scan
margins. For negative values, the corresponding margin is cut off; for positive values, it is
added.
Tolerance for mapping autoformats:
Here you can define by how many per mills the
width of a scan format recognized by the width detection may be exceeded for being
allocated to the next smaller format nonetheless.
Delay infeed
: Here you can define how long the scanner waits after positioning the
document until it takes the document in.
Standby waiting time
: Waiting time until the scanner enables the energy saving mode (0:
Energy saving mode deactivated).
In energy saving mode, the scanner is not recognized by the computer (as if switched
OFF). The operating LED is flashing. By pressing the start key on the control panel,
you can "wake the scanner up".
Delete processed printjobs after said time: Define how long finished printjobs are hold,
before they are deleted.
Secure delete iterations: If your printjobs contain confidential data and you desire to be
sure that all files are really wiped from disk after printing, you can define the number of
overwriting cycles.
Active format systems:
Here you can select which format systems are available in ROWE
SCAN/COPY APP when selecting the format.
Stop jobs with resource error after x seconds:
If a printjob cannot be performed
