17
Component
Minimum requirements
ROWE Scan 450i
Optimum requirements
ROWE Scan 450i
Hard disc
5,400 rpm SATA
5 GB free memory
7,200 rpm SATA
50 GB free memory
Interface
High Speed USB (2.0)
Super Speed USB (3.0)
Operating
system
Windows XP SP3 (32 bits)
Windows 8. (64 bits)
Screen
Size: 17"
Resolution: 1,280 x 1,024
Size: > 19"
Resolution: > 1,280 x
1,024
Touch screen
(optional)
Size: 17"
Resolution: 1280 x 1024
Size: > 19“
Resolution: > 1,280 x
1,024
Table 1.3: PC requirements for ROWE Scan 450i with ROWE APPS (from version 1.4.7)
Administrator rights are required for installation of the ROWE Scan 450i software on
your PC.
In exceptional cases, a USB 2.0/3.0 host controller chip set may not be compatible
with the high performance transfer mode of the ROWE Scan 450i. We recommend to
use hardware meeting these requirements. A current list of compatible USB chip sets
is available on request.
1.6
Connection of ROWE Scan 450i to Power Supply
Before using the ROWE Scan 450i, connect the scanner to the power supply using the power unit.
Plug the connector socket of the supplied power unit into the connection on the back of the
scanner. Plug the connector of the power unit into a socket. Please absolutely observe the
following:
The scanner must only be connected to a grounded socket with VDE homologation.
The socket has to be protected by fuses (10 A).
