20
2.1
Erecting Scanner
Place the scanner either on the suitable ROWE floor stand, the suitable ROWE MFP stand (see
Optional Accessories ROWE Scan 450i Series,
Chapter 1.2 on Page 9), or on a sturdy table. Erect
the scanner in a way that document feed and outlet can be accessed from all sides.
Do not yet connect the scanner to power supply or computer.
Do not lift the scanner by grabbing the side boxes (also see Chapter 1.4 on Page 16).
2.2
Starting Software Installation
In order to install the software, you need the
supplied CD-Rom. First, switch the computer
On which is not yet connected to the scanner.
Put the CD-Rom into the CD-Rom drive of the
PC.
Usually, installation of the software starts
automatically. If not, start from the CD by
double-clicking
"autorun.exe"
.
The dialog box shown in Figure 2.1 appears
from which you simply select
"Install“
.
Figure 2.1: Installation screen
The installation process has been started and
you are first prompted to select the language.
Figure 2.2: Selection of language
