135
B.1
Disclaimer
The contents of all safety data sheets in this manual are subject to the following disclaimer. The
safety data sheets have been compiled to the best of our knowledge and belief as a short
instruction regarding safe handling of ROWE Scan 450i devices. We reserve the right to revise
safety data sheets if new findings are on hand.
It is the customer's responsibility to check if this information is exhaustive, to deduce all required
safety precautions, and to make sure that the most recent version of the data sheet is on hand by
contacting ROWE in this respect.
Insofar as permitted by law, we do not accept any liability for completeness and correctness of
these safety data sheets.
B.2
Safety Information
The ROWE Scan 450i devices have been designed and manufactured according to the state-of-
the-art. However, health hazards and risks of property damage may occur during use.
Operators shall use the ROWE systems in proper technical condition, according to the intended
use, being aware of safety and hazards, and observing this Operating Manual. In particular failures
impairing safety have to be eliminated immediately.
The ROWE systems of the Scan 450i series shall exclusively be used as described in this Operating
Manual. Another use or use exceeding the above shall not be deemed intended use. The
manufacturer is not liable for damages resulting therefrom. Solely the user bears the risk for the
above.
All persons dealing with erection, commissioning, operation, and maintenance of the device shall
be appropriately skilled and trained. In order to ensure their safety, it is important to observe the
Operating Manual thoroughly.
B.3
Prior to installation
Read the Operating Manual including the safety notes. Also ensure that all operators read the
Operating Manual. The documents as to the device shall be stored close to the device where they
can be found easily by any operator. Check the conditions at the intended place of installation.
B.3.1
Conditions of Room
Provide for the following conditions:
There shall be sufficient space around the scanner so that it is easily accessible from all
sides.
