Roughneck Jackman Fusion Equipment, Operator'S Manual

Page: 39 / 52

JACKMAN FUSION EQUIP – ELECTROFUSION PROCESSOR OPERATORS MANUAL - REV 0
Page 37 of 48
Downloading Data
Data Stored
The following data is stored for each fusion that the processor performs. The data stored in the processor can
be downloaded wirelessly via Bluetooth. The data is output in a binary format that is compatible with a free
macro-enabled Excel Spreadsheet available from JACKMAN FUSION EQUIPMENT.
Field Description
SN The serial number of the processor.
Fusion # The fusion number.
User Fusion # The user resettable fusion counter.
Date Date and time the fusion was performed.
Cal Due The date that the calibration is due.
Cal Req. TRUE if the calibration date was expired when the fusion was completed.
Firmware The firmware version of the processor loaded when the fusion was performed.
Result The resulting error code.
Mode The mode used for entering the fusion parameters.
Fitting The fitting manufacturer type and size.
Control The requested fusion output voltage.
Temp The ambient temperature at the time of the fusion.
Nom. Time The requested fusion time.
Comp Time The fusion time after temperature compensation was applied.
Actual Time The actual time the fitting was fused.
Mea Res The resistance of the fitting specified in the barcode.
Tolerance The specified resistance tolerance.
Mea Res Pre The actual measured resistance of the fitting before the fusion.
Mea Res Post The actual measured resistance of the fitting after the fusion.
Cooling time The cooling time of the fitting specified in the barcode.
Input Volts The measured generator voltage taken before the fusion.
High Volts The highest measured generator voltage during the fusion.
Low Volts The lowest measured generator voltage during the fusion.
Wave The type of supply waveform identified during the fusion (Sine or Square).
Frequency The measured generator frequency made before the fusion started.
High Freq The highest measured generator frequency during the fusion.
Low Freq The lowest measured generator frequency during the fusion.
L Out V The lowest measured output voltage during the fusion.
H Out V The highest measured output voltage during the fusion.
L Out A The lowest measured output current during the fusion.
H Out A The highest measured output current during the fusion.
Ah Out The total number of Amp-Hours expended during the fusion.
Position The GPS latitude and longitude at the time of the fusion.
Sat The number of satellites used when determining the GPS fix.
Q The GPS signal quality (0=no good, 1=GPS, 2=DGPS).
HDOP GPS Horizontal Dilution of Precision.
Operator The operator ID code if enabled.
Traceability The pipe/fitting traceability codes if enabled.