JACKMAN FUSION EQUIP
–
ELECTROFUSION PROCESSOR OPERATORS MANUAL - REV 0
Page 4 of 48
WARRANTY AND LIMITATION OF LIABILITY
1.
THE MANUFACTURER warrants the
Roughneck Electrofusion Processor
against defects resulting from
faulty workmanship or materials for a period of one year from the date of the new unit calibration. Any
Processor repaired or replaced pursuant to this warranty within the original warranty period will be
warranted for the remainder of the original warranty period. THE MANUFACTURER also warrants the
calibration and repair services it provides on the Processor against defects resulting from faulty
workmanship for a period of 60 days upon which the calibration or repair services are complete. These
warranties are subject to the limitations, exceptions, disclaimers and conditions stipulated hereunder or
posted, updated or amended on
THE MANUFACTURER’
s website with respect to the
Roughneck
Electrofusion Processor
.
2.
If THE MANUFACTURER receives notice of such defects during the warranty period, THE MANUFACTURER
will repair or replace, free of charge, including ground shipping charges, any Processors or Services which
are found to be defective in workmanship or material, provided that the following conditions are met:
a)
THE MANUFACTURER is notified in writing of such defect immediately upon discovery of same and the
defective Processor is promptly returned to THE MANUFACTURER (at the location designated by THE
MANUFACTURER for those purposes), freight prepaid. Claimant must provide documentary evidence
of failure, as well as the components that are alleged to have failed and agree to inspection by THE
MANUFACTURER of the circumstances in which the alleged defective Processor(s) was/(were) used.
b)
The Processor has been maintained, calibrated, serviced and used in full compliance with this Manual
and other technical information or literature provided by THE MANUFACTURER from time to time.
c)
The Processor has not been altered or modified after leaving THE MANUFACTURER premises, shows no
evidence of disassembly or tampering, is not and has not been subjected to abnormal operating
conditions, accident, abuse, misuse, unauthorized alteration or repair and the defect is not due,
without limitation, to faulty installation, maintenance, calibration or use, improper site preparation or
maintenance, ordinary wear and tear, corrosion, acts of nature such as earthquakes, fire, flood or
lightning or any other event of force majeure.
d)
THE MANUFACTURER does not warrant that the operation of the
Roughneck Electrofusion Processor
will be uninterrupted or error free.
e)
Replacement Processor may be either new or like-new.
3.
THE MANUFACTURER disclaims any liability or responsibility:
a)
for labor, materials and/or other expenses required to replace the defective Processor or Service or to
repair any damage resulting from the use thereof.
b)
for loss or damage resulting from failure to abide by manufacturer’s warnings, safety instructions or
other precautionary guidelines.
4.
ANY CLAIM OF LIABILITY ASSERTED AGAINST THE MANUFACTURER WHETHER IN CONTRACT OR IN TORT
(INCLUDING NEGLIGENCE) OR OTHERWISE, WITH RESPECT TO OR ARISING OUT OF THE SALE, DELIVERY,
INSTALLATION, REPAIR OR USE OF ANY PROCESSORS OR SERVICES SOLD BY THE MANUFACTURER SHALL
NOT EXCEED THE PURCHASE PRICE OF THE PROCESSORS OR SERVICES FOUND TO BE DEFECTIVE. It is the
responsibility of the owner to obtain and pay for emergency repairs.
