![background image](http://html1.mh-extra.com/html/neilsen/ct2247/ct2247_instruction-manual_3945058001.webp)
Product use and care
This product is not a toy. Keep it out of reach of children.
Use the correct product for the correct vehicle. The correct product will do the job
better and safer at the rate for which it was designed. Do not modify this product or
use it for a purpose for which it is not intended.
Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the product's operation. If damaged, have the product
repaired before use. Use the product and accessories etc., in accordance with these
instructions and in the manner intended for the particular type of product, taking into
account the working conditions and the work to be performed. Use of the product for
operations different from those intended could result in a hazardous situation.
Operating instruction
Read the ENTIRE WARNING section at the beginning of this manual
including all text under subheadings therein before set up or use of
this product.
This service tool will work with most model vehicles.
Read the vehicle owner's manual before use.
Always wear eye protection and hand gloves when work with the tool!!
Always connect the attachment properly and install seal straight.
In
s
tr
u
c
ti
o
n M
a
n
u
a
l
Maintenance and servicing
Damaged products can fail, causing personal injury. Do
not use a damaged product.
Before each use, inspect the general condition of the product.
Check for misalignment or binding of moving parts, cracked or broken parts, and any
other condition that may affect its safe operation. After use, clean external surface of
the product with clean, moist cloth.
Note! Test the kit thoroughly before use.
Work Area Safety
Keep children and bystanders away while operating. Distractions can cause you
to lose control.
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Personal safety
Wear ANSI-approved safety goggles, NOSE-approved dust mask/respirator, and
heavy-duty work gloves during use and service.
Stay alert and use common sense when operating. Do not use when tired or under
influence of drugs, alcohol or medication.
Do not overreach. Keep proper footing and balance at all times. This enables better
control in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewelry or long hair can be caught
on moving parts.
CAUTION!
This kit includes 3 pin sizes to fit a variety of chains.
This tool will break and rivet 420-630 rear drive chains.
It comes with 2mm, 3mm, 4mm, replacement tips for different size cam chains.
Cam chain breaker riveter-breaks and rivets/stakes all over head cam chains
on all model japanese and european OHV cam chains.
CHAIN BREAKER AND RIVETING TOOLS
CT2247