Section 02 717 ENGINE
Subsection 04 (BOTTOM END)
Crankcase Screws
Apply Loctite 518 (P/N 293 800 038) on screw
threads and Molykote 111 (P/N 413 707 000) be-
low head screws.
Torque crankcase screws
no. 7
and
no. 9
to
24 N•m (17 lbf•ft) as per following illustrated
sequence.
F01D20D
12
7
1
11
3
9
5 13
14
6
10
2
4
8
Torque 2 M10 crankcase screws
no. 8
to 40 N•m
(30 lbf•ft).
F01D20B
1
1. Torque to 40 N•m (30 lbf•ft)
Oil Fittings
If inlet and outlet oil fittings
no. 11
of rotary valve
shaft have been removed from crankcase, rein-
stall them with their end pointing toward ignition
housing. Apply Loctite 518 (P/N 293 800 038) on
threads of fittings.
Studs
At assembly in crankcase, apply Loctite 518
(P/N 293 800 038) on threads of studs
no. 10
.
Torque to 10 N•m (89 lbf•
in
).
PTO Flywheel
Apply Loctite 767 (antiseize lubricant) (P/N 293
800 070) to crankshaft threads.
Using the same tools as for disassembly proce-
dure, torque PTO flywheel to 110 N•m (81 lbf•ft).
46
smr2005-078
www.SeaDooManuals.net
