Ross CrossOver 16, Operator'S Manual

Page: 2 / 92

CrossOver 16 • User Manual
• Ross Part Number:
4801DR-003-4.0
• Release Date: February 21, 2011. Printed in Canada.
• Software Issue:
4.0
The information contained in this manual is subject to change without notice or obligation.
Copyright
© 2011 Ross Video Limited . All rights reserved.
Contents of this publication may not be reproduced in any form without the written permission of Ross Video
Limited. Reproduction or reverse engineering of copyrighted software is prohibited.
Patents
This product is protected by the following US Patents: 4,205,346; 5,115,314; 5,280,346; 5,561,404; 7,034,886;
7,508,455; 7,602,446; 7,834,886. This product is protected by the following Canadian Patents: 2039277; 1237518;
1127289. Other patents pending.
Notice
The material in this manual is furnished for informational use only. It is subject to change without notice and should
not be construed as commitment by Ross Video Limited. Ross Video Limited assumes no responsibility or liability
for errors or inaccuracies that may appear in this manual.
Trademarks
• is a trademark of Ross Video Limited.
• Ross, ROSS, ROSS ®, CrossOver, and MLE are registered trademarks of Ross Video Limited.
• All other product names and any registered and unregistered trademarks mentioned in this guide are used for
identification purposes only and remain the exclusive property of their respective owners.
Important Regulatory and Safety Notices to Service Personnel
Before using this product and any associated equipment, refer to the “ Important Safety Instructions ” listed below
to avoid personnel injury and to prevent product damage.
Product may require specific equipment, and/or installation procedures to be carried out to satisfy certain regulatory
compliance requirements. Notices have been included in this publication to call attention to these specific
requirements.
Symbol Meanings
Protective Earth
— This symbol identifies a Protective Earth (PE) terminal, which is provided for
connection of the supply system’s protective earth (green or green/yellow) conductor.
This symbol on the equipment refers you to important operating and maintenance (servicing)
instructions within the Product Manual Documentation. Failure to heed this information may present a
major risk of damage or injury to persons or equipment.
Warning
— The symbol with the word “ Warning ” within the equipment manual indicates a
potentially hazardous situation which, if not avoided, could result in death or serious injury.
Caution
— The symbol with the word “ Caution ” within the equipment manual indicates a potentially
hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to
alert against unsafe practices.