CrossOver 16 User Manual (v4.0)
Introduction • 1–3
13.
Mnemonic Display
• Displays input names assigned to source
buttons.
14.
Custom Control Buttons
• Use these buttons to record, play, stop, and
edit custom controls.
15.
Custom Control Banks
• Use these buttons to access custom control
banks.
Control Panel Rear Connections Over-
view
Figure 1.3 CrossOver 16
1.
Power Switch
• Turns the control panel on and off.
2.
Power Connectors (Primary and Redundant)
• Connects the control panel to the DC power
supply.
• Second power connector is for redundant
power supply (optional).
3.
Frame Port
• Connects the control panel to the frame.
4.
External Link Port
• Reserved for future expansion.
Frame Overview
The frame contains the video processing hardware
and provides the inputs and outputs for the switcher.
The control panel connects to the frame via the Panel
Port on the frame and the Frame Port on the control
panel.
Figure 1.4 CrossOver 16 Frame (Door Removed)
1.
Power Switch
• Turns the frame on and off
2.
Cooling Fans
• The fans provide airflow to cool the
electronic components in the frame.
3.
USB Port
• Plug a USB drive into the USB port to load
and store memories and to perform software
upgrades.
Frame Rear Connections Overview
Figure 1.5 CrossOver 16
1.
Power Connectors (Primary and Redundant)
• Connects the frame to the DC power supply.
• The second power connector is for redundant
power supply (optional).
2.
Editor, Tally, and GPI Ports
• The ports allow your switcher to control tally
lights, respond to GPI commands, and be
controlled by external editors.
3.
Input BNCs
• 12 High Definition serial digital video inputs.
4.
Panel Port
• Connects the frame to the control panel.
5.
Ethernet Port
• Enables the switcher to connect to your
network.
6.
Output and Reference BNCs
• 2 High Definition serial digital video Program
bus outputs.
• 1 High Definition serial digital video Preset
bus output.
• 3 High Definition serial digital video Aux bus
outputs. A fourth Aux bus is shared with the
PGM 2 output
• 1 External Tri-level or Black Burst reference
input.
• 3 Internal Reference outputs.
Removing the Frame Door
You must remove the frame door to power on/off the
frame and to access the USB port. Once you have
powered on/off the frame or are finished working
ON
OFF
FRAME
EXT
LINK
PS 2
PS 1
1
4
2
3
POWER
2
3
1
IN 1
IN 2
IN 3
IN 4
IN 5
IN 6
IN 7
IN 8
IN 9 IN 10 IN 11 IN 12
AUX 1 AUX 2 AUX 3 PV PGM1 PGM2 ANLG
OUT
REF
OUT 1
REF
OUT 2
REF
OUT 3
REF IN
GPI
TALLY
PS 1
PS 2
EDITOR
PANEL
2
1
3
5
4
6
Summary of Contents for CrossOver 16
