Page - 55 -
FLF 15000/1800/500
Panther 8x8 CA-7
© 2014
8%
3%
Air Crash Mode
Stopping of turret operation:
◊
Press switch (S18) again - the turret is flushed automatically
when continuing water discharge.
◊
Release switch (S50) or press activated switch (S488).
◊
The pump engine will idle.
◊
Press "STOP"-switch (S47).
The turret moves to it's transport position.
◊
Disengage the pump - please refer to the "Engaging the
Pump" chapter.
ATTENTION !
On designs without a turret pipe, AFFF foam compound should be
used, otherwise the foam quality is poor ! *
The pump system must be flushed after every foam operation.
Please refer to the "Flushing after Foam Operation" chapter.
Operate the roof turret with closed roof hatch only !
S488
S50
S47
S18
