Page - 36 -
FLF 15000/1800/500
Panther 8x8 CA-7
© 2014
Technical Description
ATTENTION !
If the pilot lamp (H6) or (H63) illuminates whilst driving, stop the
vehicle and close the corresponding open locker compartment, or
lower the light mast.
Switches and pilot lamps of fire fighting superstructure in the cabin
PDD panther driver's display - for further information please
refer to the chassis operation manual
H1
pilot lamp: indicates engaged rotating beacons
H6
pilot lamp: indicates open roller shutter or compartment door
If the parking brake is released while a locker compartment
is open, the (H6) indicator light changes from yellow to red,
starts blinking together with (H186) warning triangle and
during the first 5 seconds an acoustical warning tone
sounds intermittent.
H20
pilot lamp: indicates engaged air traffic warning lights
H22
warning lamp: indicates low compressed air pressure -
If active the lamp (H186) is blinking simultaneously.
H51
pilot lamp: indicates engaged yellow rotating beacon(s) *
H63
pilot lamp: indicates light mast is not in transport position
If the light mast is raised, and the parking brake is released,
the lamp (H63) starts blinking red and simultaneously the
lamp (H186) starts blinking "STOP". At the same time, an
acoustical warning tone sound continuously until the light
mast is in transport position.
H66
pilot lamp: indicates turret in transport position *
H71
pilot lamp: turret symbol blinks green indicating roof turret
engaged
Note: The turret symbol blinks green when started. If the
vehicle was parked with "Turret not in transport position",
the symbol illuminates red.
ATTENTION: Roof turret not in transport position!
H173 pilot lamp: indicates half output selected; half of the foam
pipe is black coloured
H186 multiple warning lamp: always blinks together with an
active warning lamp
H187 pilot lamp: indicates engaged surrounding field illumination
J1
water pump
blue - during priming procedure
red - warning - indicates water pump temperature higher
than 60
°
Celsius and the pump drain valve will be opened;
The overheating protection system is engaged, the (H186)
warning triangle starts blinking and during the first 5
seconds an acoustical warning tone sounds intermittent.