RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
5
sary. Disconnect from mains only by pulling out plug from mains socket.
Ensure adequate ventilation and do not cover power supply to prevent overheating.
The power supply may not be used during a
thunderstorm
. Otherwise danger of electrocution.
Damage from heat – fire hazard
Do not leave camera in places that are susceptible to considerable increases in temperature
(e.g. a vehicle). The
housing and internal parts may be damaged, which in turn could cause a fire.
Do not wrap up camera or place on textiles.
This could produce a build-up of heat in the camera that can cause defor-
mation of the housing and may represent a fire hazard.
Injuries and material damage
When installing and assembling the camera ensure that a 10 cm gap is maintained on all sides in order to provide adequa-
te ventilation. Ensure, in particular, that ventilation slots are not covered by newspaper, table clothes or curtains.
Never place open fire sources
on or near the camera.
Damage to the electronics, lens or accessory caused by external influences
such as impacts, falls or others
are not
covered by the warranty and are chargeable.