RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
21
Enter the shown public IP address in the Browser of a device that is
not
connected to the Internet via your home network.
Activation from the same network is generally not possible.
If the log-on page of your surveillance camera opens automatically, access for the surveillance camera has been set up auto-
matically in the router. You can then continue the installation with section 5.7.,
Set up Domain name
,.
Where automatic set up via the UPnP function is not possible, the respective access must be set up manually. This is referred to
as
Port forwarding
. During this process, a single access is directly passed on to the surveillance camera.
The below example shows the settings to be selected in the router to set up such an access. As the settings of the router can
differ considerably, a general description cannot be provided at this point. Please check in the router documents how individu-
al devices can access the router. This information can generally be found under “Port Forwarding“.
We also have provided more detailed descriptions for different router models of how to set up Port forwarding. These descrip-
tions can be found on Internet page:
http://www.safetycam-info.com.
If your router is not listed, please contact our Service Hotline.
First start the configuration program of your router. For this you require the local network address of your router. You can check
the local network connection by searching for the surveillance camera in the program
Rollei SafetyCam Config
and then
displaying the network settings using option “Address“. Note down the address listed as“Standard gateway”.
Further information for activating the router can also be found in the Operating Instructions of your router.
For this, enter the local network address of your router in the Browser and open the configuration menu. Next, open the Port
forwarding menus in the Configuration menu.