RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
28
5.10. Installation tips
Below, we have provided different information relating to the installation of the surveillance camera in case of problems with
the standard installation. For further information see page
http://www.safetycam-info.com.
The program
Rollei SafetyCam Config
cannot find the camera.
Are surveillance camera and computer connected to router?
If various wireless networks are active on the computer, deactivate the wireless networks to which the camera is not
connected.
Deactivate the Firewall of the computer.
The router has no port for the network cable.
Connect the surveillance camera directly to the computer.
1. Deactivate all networks on the computer.
2. Connect the surveillance camera to the computer using the network cable
3. Use program
Rollei SafetyCam Config
to search for the surveillance camera.
4. Under
Rollei SafetyCam Config
select camera and then the “address“
5. Deactivate “DHCP“ and enter under “Static configuration“:
IP address 169.254.10.100; Subnet mask: 255.255.0.0
“Standard gateway“ and “DNS Server“ remain empty
Click on “Apply” and wait until the program shows the camera.
The wireless connection between the surveillance camera and the router is not working.
Check the wireless settings and in particular the entered code.
All WLAN channels may not be enabled. Adjust the “Region” setting when entering the Wireless settings.
You router may allocate changing local IP addresses each time it connects. Search for the camera again using
Rollei Safety-
Cam Config.