RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
49
Use time schedule:
You can restrict the period of time
during which alarms can be triggered. As soon as this
option is selected, the adjacent time schedule appears, in
which the active times can be selected.
Select the times during which the alarm settings should
be active.
Sensitivity
Enter the sensitivity for movement sensing
using a value between 0 and 9. The higher the value, the
higher the movement sensing sensitivity.
Report to email:
Activate this option if an email is to be sent out in the event of an alarm.
Report to FTP:
Activate this option if images are to be stored on the FTP server in the event of an alarm.
Interval:
Activate this option if images are to be stored on the FTP server in the event of an alarm. Values are in seconds.
Report to FTP:
Activate this option if an HTTP address is to be called up in the event of an alarm.
URL:
State the HTTP address to be called up in the event of an alarm.
Click on
“Apply“,
to accept the changed settings. The changes to the alarm settings are saved without having to restart the
surveillance camera.
8.12. Resetting
Click on “reset now” to reset the surveillance camera to the default settings.
Resetting takes 2 minutes. Wait until the Browser window shows the logging on option again.
Note:
• Selection of this function deletes all previous settings.
• If the network settings have been changed, the surveillance camera may no longer be attainable under the current
address. The surveillance camera can be found again using the configuration program.
• The surveillance camera can also be reset by pressing the RESET button underneath the camera. Keep RESET button
depressed for 15 seconds.