RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
22
In the below example, this can be found under “Applications & Games“ as “Simple Port forwarding”.
In the provided example two surveillance cameras are connected to the router, one camera with the name
IPCamera1
and the local network address 192.168.1.110, a second camera with the name
IPCamera2
and the local network address
192.168.1.111.
Only the external port 81 is set up for the surveillance camera IPCamera1. TCP and UDP are the allowed protocols although
only TCP is required. These cameras are accessed via the Internet using address
http://xxx.xxx.xxx.xxx:81
(with xxx.xxx.xxx.
xxx being the public IP address of the router).
In order to avoid problems the same internal and external port of the surveillance camera should be chosen. Activate the
surveillance camera again using the program “
Rollei SafetyCam Config”
. Under “Settings” change to “Network settings” and
change the value under “Port” also to 81. Save the changes.
You should then be able to access the surveillance camera via the camera as described at the beginning of this section.
Note:
• Ensure that for every existing surveillance camera a separate port is being used and that an external Port may not be
assigned twice.