RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
41
Region:
Depending on the region, W-LAN does not support various channels. Select the region in which the surveillance
camera will be used from the “Region” option.
Encoding:
Data in wireless networks are in most cases transmitted encoded to prevent third-party access. State what
type of encoding is used in your W-LAN network.
When
“Uncoded“
is selected, data are not encoded prior to transmission.
When using
“WEP“
,
“WPA“
or
“WPA2“
encoding, additional encoding information must be provided. Enter the same settings
as shown for the router or access point.
Note:
• Enter wireless network settings without changing. This is the only way to ensure the correct connection of the
surveillance camera.
• Also, general settings of the router or access points should not be changed where this is not required. Otherwise this
could result in problems with other W-LAN devices in the network.
Use the
“Search
“ function to start an automatic search of existing wireless networks. Select the desired WLAN network
from the list by marking it under “Selection” and click on
“Use“
. Where encoding data is required for the selected network,
these must still be entered.
Click on
“Apply“,
to accept the changed settings. Next, restart the surveillance camera to accept the wireless settings
changes. The restart takes about 2 minutes.