RCP Technik GmbH & Co. KG, Tarpen 40/Gebäude 7b, D-22419 Hamburg
Hotline: +49 (0)6 31/3 42 84 49
30
6. The program Rollei SafetyCam Config
Below we have provided a detailed description of the program
Rollei SafetyCam Config
, as installed in section 5.3.,
Software
Installation
.
Ensure that the surveillance camera is connected to the router via the network cable and is connected to the mains (see
section 5.1.,
Hardware Installation
). A network connection between the computer and the router must also exist. Open the
program
Rollei SafetyCam Config.
In the program select ”
Start search
“, to open a list of available surveillance cameras.
From the list select the surveillance camera to be set up or called up. This is also necessary if only one camera exists.
After selecting the function “
Address
“ the
network data are displayed for the selected
surveillance camera.
The network setup for the camera is completed
automatically provided that the option”
Use DHCP
“ has been activated, the router supports DHCP
and is also activated . If an address different to
0.0.0.0 appears under address, the automatic
network setup of the surveillance camera has been
completed successfully.
To change the internal
Port
used by the surveillance
camera, enter the new port number. When using
port forwarding, the external and internal port of
the surveillance camera should be the same.
You can, however, also manually specify the network data if the automatic configuration is not functioning. First deactivate
“
Use DHCP
“. This opens the input fields for Static Configuration.
Under
Static Configuration
enter the network data for the surveillance camera. These data are generally obtained via the