manualshive.com logo in svg

Roland TrueVIS SG-300, User Manual

Share
Download
Roland TrueVIS SG-300 User Manual Download Page 8

6

1

Machine 

H

ighlights

1

Machine 

H

ighlights

P rinter Unit

Front

No.

Name

Function overview

1

Ink  slot cover,  ink  slots

Open this cover to access the slots in which the 

ink trays are inserted. Leave this closed except 

when switching ink trays.

2

Front cover

Open this when necessary, such as when load-

ing media. In all other situations, keep the front 

cover closed.

3

Loading lever (f ront)

Operate this when you load media.

4

P anel cover,  op eration p anel

Open this cover to access the operation panel. 

Use the operation panel to operate this machine.

 

"

P .   11  " O p e r a t i o n   P a n e l "

5

Lef t cover

Open this when you perform maintenance.

6

Right cover

Open this when you perform maintenance.

7

Drain bottle

Discharged fluid is stored in this bottle.

P art Names and Functions

Summary of Contents for TrueVIS SG-300









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands