B asic P rinting Method
2
B
asic
O
p
eration
45
H
< Two shap es are p eeled of f together/back ing p ap er is also cut>
P ress [
] to select " Y ES."
< Two shap es are p eeled of f sep arately >
P ress [
] to select " DO NE."
I
ress
to con rm our entr
If you select "YES," the test pattern is cut again. Go back to step
F
and perform the setting again.
If you select "DONE," proceed to step
9
.
8.
Correct the misalignment of the p rinting and cutting p ositions. (Sep arate setting
"
P . 13 5
)
M E M O
Subtle misalignment between the printing and cutting positions may occur due to the thickness
of the media or the head height. We recommend that you make corrections to match the media
you are using.
A
P ress [
] to select " SET."
B
ress
to con rm our entr
The test pattern (P&C1) is printed and cut. The test pattern is printed at three locations on the media:
at the two edges and in the center.
You can select "NEXT" and press [ENTER] to proceed to the next menu.
C
Check the test p attern (P & C1 ).
Check for misalignment in the cutting position and printing position.
C u t t i n g p o si t i o n
P r i n t i n g p o si t i o n
P r i n t i n g p o si t i o n a n d cu
t t i n g
p o si t i o n a r e m i sa
l i g n e d .
P r i n t i n g p o si t i o n a n d cu
t t i n g
p o si t i o n a r e a l i g n e d .
