manualshive.com logo in svg

Roland TrueVIS SG-300, User Manual

Share
Download
Roland TrueVIS SG-300 User Manual Download Page 11

P art Names and Functions

1

Machine 

H

ighlights

9

No.

Name

Function overview

6

G rit rollers 

These rollers feed the media.

7

B lade p rotector

This is the path that the blade takes during cut-

ting. It protects the tip of the blade.

8

P laten

This is the path over which the media passes. A suc-

tion fan that keeps the media from coming loose 

and a print heater that helps fix the ink are built in.

9

Ap ron

This has a built-in dryer to speed up drying of the ink.

0

W

ip er

Cleans the print heads during automatic cleaning 

and in similar situations.

⑪

W

ip er tray

This tray houses the TR cleaning liquid used to 

clean the wiper.  It contains three tray pads.

B

W aste valve

Open this valve to drain the discharged fluid that 

has collected in the wiper tray.

Summary of Contents for TrueVIS SG-300









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands