B asic P rinting Method
2
B
asic
O
p
eration
48
C
Check the test p attern
( C & C 1)
condition.
Check for misalignment in the cutting position and printing position.
C u t t i n g p o si t i o n
P r i n t i n g p o si t i o n
P r i n t i n g p o si t i o n a n d cu
t t i n g
p o si t i o n a r e m i sa
l i g n e d .
P r i n t i n g p o si t i o n a n d cu
t t i n g
p o si t i o n a r e a l i g n e d .
D
< Cutting p osition and p rinting p osition are not aligned>
P ress [
] to select " Y ES."
< Cutting p osition and p rinting p osition are aligned>
P ress [
] to select " DO NE."
E
ress
to con rm our entr
If you select "YES," the test pattern (C&C2) for setting the correction values is printed and cut. Pro-
ceed to the next procedure.
If you select "DONE," proceed to step
10
.
F
P ress [ ENTER] .
INPUT
G
Check the correction values f rom the test p attern (C& C2 ) condition.
The point where the cutting line intersects the correction-value scale is the correction value. Check
the scan direction (the direction of print head movement) and the feed direction (the media feed
direction).
F e e d d i r e ct i o n
C o r r e ct i o n -va
l u e sca
l e
S ca
n d i r e ct i o n
C u t t i n g l i n e
I n t h i s ca
se
, t h e co
r r e ct i o n
va
l u e i s " -0. 3 . "
C u t t i n g l i n e
