O ther B asic O p erations
2
B
asic
O
p
eration
7 4
E
Line up the edges of the media with the centers of the holes of the media clamp s (lef t
and right).
When you are performing cutting only, do not use the media clamps.
"
P . 5 7 , " I m p o r t a n t N o t e o n C u t t i n g "
F
Close the f ront cover.
If the [PRESS ENTER KEY TO CONTINUE] message appears on the screen, press [ENTER].
When the front cover is closed, the print-head carriage moves and detects the width of media. This
operation is called initialization. When initialization ends, [SETUP] on the operation panel lights, and
the printable width is displayed on the screen. This completes the setup of the media.
P ausing or Canceling O utp ut
You can pause and cancel output before it finishes.
I m p o r t a n t
We do not recommend resuming printing because horizontal stripes are produced at the place
where printing was paused.
P rocedure
A
ress
be ore rinting nishes
The printing operation is paused.
B
P ress [ P AUSE] again to resume p rinting.
To cancel printing, go the next procedure without pressing [PAUSE].
C
W
hen the screen shown below ap p ears, hold down [ P AUSE] f or one second or longer.
The printing operation is canceled.
D
Stop sending the data f rom the comp uter.
