Roland SOLJET PRO4 XF-640 User Manual Download | Manualshive

Page: 20 / 196

background image

1

Machine Highlights

To Ensure Safe Use

18

Incorrect operation may cause injury

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may lead to an
accident.

Keep children away from the machine.

The machine includes areas and compo-
nents that pose a hazard to children and
may result in injury, blindness, choking, or
other serious accident.

Never operate the machine while tired or

after ingesting alcohol or any medication.

Operation requires unimpaired judgment.
Impaired judgment may result in an ac-
cident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that ex-

ceeds its capacity.

Doing so may result in injury or fire.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with

this machine.

Incompatible items may lead to an accident.

Before attempting cleaning, mainte-

nance, or attachment or detachment of

optional items, disconnect the power

cord.

Attempting such operations while the ma-
chine is connected to a power source may
result in injury or electrical shock.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertent contact with certain areas may

cause the hand or fingers to be pinched or

become caught. Use care when performing
operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the ma-
chine, resulting in injury.

Conduct operations in a clean, brightly

lit location.

Working in a location that is dark or cluttered
may lead to an accident, such as becoming
caught in the machine as the result of an
inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support a per-
son. Climbing or leaning on the machine
may dislodge components and cause a slip
or fall, resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To avoid
injury, handle the tool with care.

WARNING

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in fire, electrical shock,

or injury. Entrust repairs to a trained service
technician.

«
...
18
19
20
21
22
...
»

Summary of Contents for SOLJET PRO4 XF-640





































































































































































































Reviews:

No comments

Related manuals for SOLJET PRO4 XF-640

Brand: Furuno Pages: 201

soljet pro4 xf 640

Brand: Roland Pages: 150

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands