Roland SOLJET PRO4 XF-640, User Manual

Page: 144 / 196

4
Using Media Take-up System
Part of Practice
142
How to Operate the MANUAL Switch on the Take-up Unit
You can take up media by using the MANUAL switch.
About Length Output At One Time When "TU2" is selected
If too long media is output at one time when "TU2" is selected, the media may get soiled by touching the
work floor. To avoid the media from getting soiled by touching the floor, output the media by about 300 mm.
To output by limiting the length, use the function of software RIP.

Refer to the following when Roland VersaWorks is used.
How to Output by Limiting Length (Roland VersaWorks)
This section describes “how to output by limiting the length” using Roland VersaWorks (hereinafter RVW). For
information on the detail usage of RVW, refer to the user’s manual of RVW.
Procedure

Open "Que Properties" window (or "Job Setting" window)
Select the input folder to be used.

Click .
Select ”CustomCUT” from [Size] under
“Media Settings.”
Set “H.”
Take-up with inward curl
Take-up with outward curl
Que Properties window
(The setting item and the method in "Job Setting"
window are the same as this procedure.)