manualshive.com logo in svg

Roland SOLJET PRO4 XF-640, User Manual

The Roland SOLJET PRO4 XF-640, a cutting-edge large-format printer, offers exceptional printing quality. Ensure a hassle-free setup with our comprehensive Setup Manual, available for free download at manualshive.com. This invaluable manual provides step-by-step instructions and detailed information, empowering you to optimize your printing experience.

Share
Download
background image

4

Part of

Practice

Performing Printing and Cutting Separately

135

Press 

.

The test pattern (C&C1) is printed and cut.

When adjustment is needed, go on to the next Procedure.

Press 

 to display the left figure.

Press 

.

The test pattern (C&C2) is printed and cut.

Press 

 to display the left figure.

Press 

.

CROP-CUT  ADJ.

TEST  PRINT

To check the test pattern (C&C1)

Check to make sure that the printing position and the cutting position are aligned.

CROP-CUT  ADJ.

TEST  PRINT  2

To check the test pattern (C&C2)

The point where the cutting line intersects the correction-value scale is the correction value. Check 
the scan direction and feed direction respectively.

CROP-CUT  ADJ.

SETTING

Printing position and Cutting position 

are misaligned.

Printing position and Cutting position 

are aligned. 

Cutting position

Printing position

Feed direction

Cutting line

Scan direction

Cutting line

For the figure, the correction 

value is “-0.3.”

Correctionvalue scale

Summary of Contents for SOLJET PRO4 XF-640





































































































































































































Reviews:

No comments

Related manuals for SOLJET PRO4 XF-640

Roland DXY-101 Operation Manual preview
DXY-101
Brand: Roland Pages: 36

Brands by name

Popular brands

Load more brands