Roland Fantom-Xa Owner'S Manual Download

Page: 83 / 264

Modifying the Sound in Real Time

You can use the REALTIME CONTROL knobs and ASSIGNABLE
SW buttons to modify the sound in real time.

Access the Patch Play screen (p. 29).

You can select the function of the knobs by pressing the

button located at the right of the REALTIME CONTROL
knobs.

•

When the FILTER/ENV indicator is lit

Turning the knobs will control Cutoff, Resonance, Attack, and
Release.

•

When the ARP/RHY indicator is lit

Turning the knobs will control the arpeggio parameters Range
and Accent, and the rhythm parameters Accent Rate and
Tempo.

•

When the ASSIGNABLE indicator is lit

Turning the knobs will control the assigned parameters. You
can freely assign parameters.

If the indicators are unlit, turning the knobs will not control any
parameters.

While playing the keyboard or pressing the pads to produce

sound, operate the REALTIME CONTROL knobs and
ASSIGNABLE SW buttons.

The sound will change according to the function assigned to
each knob or button.

Hold down [SHIFT] and turn one of the REALTIME

CONTROL knobs.

A screen like the following appears.

fig.RealtimeKnob

Press

to select the parameter.

Use the VALUE dial or [INC] [DEC] to make the setting.

If you want to save the settings, press [F6 (WRITE)].

Press [EXIT] to return to the previous screen.

Realtime controller settings are saved independently for each
performance as part of the performance settings. This lets you
create performances that make effective use of controller
settings.

Realtime Controller

REALTIME CONTROL Knob Settings

Parameter

Value

Explanation

Knob C1–4 Assign

CC01–31, 33–95,
PITCH BEND,
AFTERTOUCH,
ARP STYLE,
ARP GRID,
ARP DURATION,
ARP MOTIF,
CHORD FORM,
MASTER LEVEL

Functions that will be controlled by the REALTIME CONTROL knobs

CC01–31, 33–95:

Controller numbers 1–31, 33–95

PITCH BEND:

Pitch Bend

AFTERTOUCH:

Aftertouch

ARP STYLE:

Arpeggio Style

ARP GRID:

Arpeggio Grid

ARP DURATION:

Duration of each arpeggiated note

ARP MOTIF:

Arpeggio Motif

CHORD FORM:

Chord form of the Chord Memory function

MASTER LEVEL:

The volume of the entire Fantom-Xa

Fantom-Xa_e.book 83 ページ２００４年１０月２２日　金曜日　午後２時３分

Summary of Contents for Fantom-Xa









































































































































































































































































Search results

Summary of Contents for Fantom-Xa

Reviews:

Related manuals for Fantom-Xa

Brands by name

Popular brands

Roland Fantom-Xa, Owner'S Manual

Search results

Summary of Contents for Fantom-Xa

Reviews:

Related manuals for Fantom-Xa

Brands by name

Popular brands