manualshive.com logo in svg

Roland Fantom-Xa, Owner'S Manual

The Roland Fantom-Xa is a versatile and powerful music workstation, offering a vast array of sounds and effects. Unlock its full potential with our comprehensive Workshop Manual, available for free download from manualshive.com. This manual covers everything you need to know to master your Fantom-Xa and explore its endless possibilities.

Share
Download
background image

 

 

This product complies with the requirements of European Directive 89/336/EEC.

For EU Countries

For Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du  Canada.

NOTICE

AVIS

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

–   Reorient or relocate the receiving antenna.
–   Increase the separation between the equipment and receiver.
–   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–   Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
 (1) This device may not cause harmful interference, and
 (2) This device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.

 

 

For the USA

DECLARATION OF CONFORMITY

Compliance Information Statement

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

Fantom-Xa
Synthesizer Keyboard
Roland Corporation U.S.
5100 S. Eastern Avenue, Los Angeles, CA 90040-2938
(323) 890-3700

 

2

 

 

 

To resize thickness, move all items on the front cover

 

USING THE UNIT SAFELY

 

001

 

•

Before using this unit, make sure to read the instruc-
tions below, and the Owner’s Manual.

 

..........................................................................................................

 

002d

 

•

Do not open or perform any internal modifications on 
the unit or its AC adaptor. (The only exception would be 
where this manual provides specific instructions which 
should be followed in order to put in place user-
installable options; see p. 214, p. 216.)

 

..........................................................................................................

 

003

 

•

Do not attempt to repair the unit, or replace parts within 
it (except when this manual provides specific instruc-
tions directing you to do so). Refer all servicing to your 
retailer, the nearest Roland Service Center, or an autho-
rized Roland distributor, as listed on the “Information” 
page.

 

..........................................................................................................

 

004

 

•

Never use or store the unit in places that are:
• Subject to temperature extremes (e.g., direct sunlight 

in an enclosed vehicle, near a heating duct, on top of 
heat-generating equipment); or are

• Damp (e.g., baths, washrooms, on wet floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.

 

..........................................................................................................

 

005

 

•

This unit should be used only with a rack or stand that 
is recommended by Roland.

 

..........................................................................................................

 

006

 

•

When using the unit with a rack or stand recommended 
by Roland, the rack or stand must be carefully placed so 
it is level and sure to remain stable. If not using a rack or 
stand, you still need to make sure that any location you 
choose for placing the unit provides a level surface that 
will properly support the unit, and keep it from 
wobbling.

 

..........................................................................................................

 

008c

 

•

Be sure to use only the AC adaptor supplied with the 
unit. Also, make sure the line voltage at the installation 
matches the input voltage specified on the AC adaptor’s 
body. Other AC adaptors may use a different polarity, 
or be designed for a different voltage, so their use could 
result in damage, malfunction, or electric shock.

 

..........................................................................................................

 

008e

 

•

Use only the attached power-supply cord. Also, the 
supplied power cord must not be used with any other 
device.

 

..........................................................................................................

 

009

 

•

Do not excessively twist or bend the power cord, nor 
place heavy objects on it. Doing so can damage the cord, 
producing severed elements and short circuits. 
Damaged cords are fire and shock hazards!

 

..........................................................................................................

 

010

 

•

This unit, either alone or in combination with an 
amplifier and headphones or speakers, may be capable 
of producing sound levels that could cause permanent 
hearing loss. Do not operate for a long period of time at 
a high volume level, or at a level that is uncomfortable. 
If you experience any hearing loss or ringing in the ears, 
you should immediately stop using the unit, and consult 
an audiologist.

 

..........................................................................................................

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

●

  symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

 

and center registration marks to left or right.

 

 

IMPORTANT: 

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE: 
BROWN: 

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying 
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Under no circumstances must either of the above wires be connected to the earth terminal of a three pin plug.

NEUTRAL
LIVE

For the U.K.

Summary of Contents for Fantom-Xa









































































































































































































































































Reviews:

No comments

Related manuals for Fantom-Xa

HyperX Alloy Origins HX-KB6RDX User Manual preview
Alloy Origins HX-KB6RDX
Brand: HyperX Pages: 8
Loshine KG9015 Quick Manual preview
KG9015
Brand: Loshine Pages: 2
Philips VoiceTracer VTR5080 User Manual preview
VoiceTracer VTR5080
Brand: Philips Pages: 44
Philips VTR8080 User Manual preview
VTR8080
Brand: Philips Pages: 46
Philips VTR7080 User Manual preview
VTR7080
Brand: Philips Pages: 52
Philips VoiceTracer User Manual preview
VoiceTracer
Brand: Philips Pages: 72
Toshiba Electric Keyboard Owner'S Manual preview
Electric Keyboard
Brand: Toshiba Pages: 186
Kensington KP400 Quick Start Manual preview
KP400
Brand: Kensington Pages: 6
Kensington Comfort Type Quick Start Manual preview
Comfort Type
Brand: Kensington Pages: 11
Rii Mini i6 User Manual preview
Mini i6
Brand: Rii Pages: 11
Franklin Collins DMQ-119 User Manual preview
Collins DMQ-119
Brand: Franklin Pages: 73
Optek WKP-250 User Manual preview
WKP-250
Brand: Optek Pages: 6
Hama SL 570 Operating Instruction preview
SL 570
Brand: Hama Pages: 6
Trust 1144877 Advanced Manual preview
1144877
Brand: Trust Pages: 77
Franklin Dictionary & Thesaurus MWD-1470 User Manual preview
Dictionary & Thesaurus MWD-1470
Brand: Franklin Pages: 75
Totally Wicked Rocket User Manual preview
Rocket
Brand: Totally Wicked Pages: 32
Deck CBL-108 User Manual preview
CBL-108
Brand: Deck Pages: 3
Accuratus KYBAC700-PS2HY Datasheet preview
KYBAC700-PS2HY
Brand: Accuratus Pages: 1

Brands by name

Popular brands

Load more brands