Roland Fantom-Xa Owner'S Manual Download

Page: 55 / 264

Creating a Rhythm Set

With the Fantom-Xa, you have total control over a wide variety of
settings. Each item that can be set is known as a

parameter

. When

you change the values of parameters, you are doing what is referred
to as

Editing

. This chapter explains the procedures used in creating

rhythm sets, and the functions of the rhythm set parameters.

Press [PATCH/RHYTHM] to access the PATCH PLAY

screen.

Select the part (keyboard or pad) and rhythm set whose

settings you want to edit (p. 30).

You cannot edit the rhythm sets in the GM2 group.

Press [PATCH EDIT] to access the RHYTHM EDIT screen.

fig.RhythmEdit

Press [F1 (COMMON)]–[F6 (OUTPUT)] to select the

parameter group.

Press [F1]–[F6], and then press

to select the

parameter.

Some parameters can be set independently for each wave.

To select the wave you want to edit, press TONE SELECT [1]–

[4] (PART/TRACK [5]–[8]) or

fig.RhythmTVA

Use the VALUE dial or [INC] [DEC] to change the value.

Repeat steps

–

to set each parameter.

Press [WRITE] to save the changes you’ve made (p. 57).

If you do not wish to save changes, press [EXIT] to return to
the PATCH PLAY screen.

If you return to the PATCH PLAY screen without saving, an “*”
will be displayed at the left of the rhythm set group.

If you turn off the power or select a different sound while the
display indicates “*,” your edited rhythm set will be lost.

You can edit while viewing a graphic display of the most frequently
used important parameters. Zoom Edit lets you edit the following
parameters.

With the screen for editing the above parameters shown,

press [F6 (ZOOM)].

The Zoom Edit screen will appear.

fig.ZoomEdit2

Press [F1]–[F4] to select the parameter group.

Press [CURSOR] to select the parameter.

Use the VALUE dial or [INC] [DEC] to change the value.

You can use the REALTIME CONTROL knobs to set the value.

When you have finished editing, press [F6 (EXIT)].

If a number is displayed for the parameter name (

), you can use the REALTIME CONTROL knobs (C1–C4) to set

the value.

If you press the button located at the right of the REALTIME
CONTROL knobs to make the indicator light, the knobs will control
their original functions.

fig.KnobValue

You can use the same knobs to edit the values in the Zoom Edit
screen as well.

How to Make Rhythm Set
Settings

Editing in a Graphic Display
(Zoom Edit)

Parameter

page

Parameter

page

Pitch Envelope

p. 60

TVF Envelope

p. 63

TVF

p. 62

TVA Envelope

p. 64

Using the REALTIME CONTROL
Knobs to Change the Value

Fantom-Xa_e.book 55 ページ２００４年１０月２２日　金曜日　午後２時３分

Summary of Contents for Fantom-Xa









































































































































































































































































Search results

Summary of Contents for Fantom-Xa

Reviews:

Related manuals for Fantom-Xa

Brands by name

Popular brands

Roland Fantom-Xa, Owner'S Manual

Search results

Summary of Contents for Fantom-Xa

Reviews:

Related manuals for Fantom-Xa

Brands by name

Popular brands