161
Adding Effects
Chorus Source
PRF, P1–P16
Chorus parameter settings used by the performance
PRF:
Performance settings
P1–P16:
Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
Chorus Type
0–3
Selects either chorus or delay.
0 (OFF):
Neither chorus or delay is used.
1 (CHORUS):
Chorus is used.
2 (DELAY):
Delay is used.
3 (GM2 CHO):
General MIDI 2 chorus
Reverb Source
PRF, P1–P16
Reverb parameter settings used by the performance
PRF:
Performance settings
P1–P16:
Settings of the patch/rhythm set assigned to one of the parts (Select the part number.)
Reverb Type
0–5
Type of reverb
0 (OFF):
Reverb is not used.
1 (REVERB):
Normal reverb
2 (SRV ROOM):
Simulates typical room acoustic reflections.
3 (SRV HALL):
Simulates typical concert hall acoustic reflections.
4 (SRV PLATE):
Simulates a plate reverb, a popular type of artificial reverb unit that derives its
sound from the vibration of a metallic plate.
5 (GM2 REV):
General MIDI 2 reverb
MFX Output
Assign
A, B
Output destination of the sound passed through the multi-effects
A:
OUTPUT A (MIX) jacks in stereo
B:
OUTPUT B jacks in stereo
* If the Mix/Parallel parameter is set to “MIX,” all sounds are output from the OUTPUT A (MIX) jacks in
stereo (p. 194).
* For some settings of MFX Structure, the sound that passes through the multi-effect will be sent to a dif-
ferent multi-effect, and the MFX Output Assign setting will be ignored.
Chorus Out-
put Select
MAIN, REV,
M+R
Specifies how the sound routed through chorus will be output.
MAIN:
Output to the OUTPUT jacks in stereo.
REV:
Output to reverb in mono.
M+R:
Output to the OUTPUT jacks in stereo, and to reverb in mono.
Chorus Level
0–127
Volume of the sound passed through chorus
Chorus Out-
put Assign
A, B
Selects the pair of OUTPUT jacks to which the chorus sound is routed when Chorus Output Select
is set to “MAIN” or “M+R.”
A:
OUTPUT A (MIX) jacks in stereo
B:
OUTPUT B jacks in stereo
* When Chorus Output Select is set to “REV,” this setting will have no effect.
* If the Mix/Parallel parameter is set to “MIX,” all sounds are output from the OUTPUT A (MIX) jacks in
stereo (p. 194).
Reverb Level
0–127
Volume of the sound passed through reverb
Reverb Output
Assign
A, B
Specifies how the sound routed through reverb will be output.
A:
Output to the OUTPUT A (MIX) jacks in stereo.
B:
Output to the OUTPUT B jacks in stereo.
Mastering Ef-
fect Type
0–5
Mastering effect settings
Parameter
Value
Explanation
12
13
14
15
16
17
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s effects settings are selected,
those settings are shown in each of the performance’s effects
setting screens, and the settings can be then be changed as well.
Changes to patch or rhythm set effects parameter settings are
lost when another patch or rhythm set is selected. To keep the
modified settings, save the patch/rhythm set settings (p. 37, p.
57).
Fantom-Xa_e.book 161 ページ ２００４年１０月２２日 金曜日 午後２時３分
