manualshive.com logo in svg

Roland Fantom-Xa, Owner'S Manual

The Roland Fantom-Xa is a versatile and powerful music workstation, offering a vast array of sounds and effects. Unlock its full potential with our comprehensive Workshop Manual, available for free download from manualshive.com. This manual covers everything you need to know to master your Fantom-Xa and explore its endless possibilities.

Share
Download
background image

 

20

Overview of the Fantom-Xa

 

LFO (Low Frequency Oscillator)

 

Use the LFO to create cyclic changes (modulation) in a sound. The 
Fantom-Xa has two LFOs. You can use the LFO to apply an effect to 
either the WG (pitch), the TVF (filter), or the TVA (volume). When 
an LFO is applied to the WG pitch, a vibrato effect is produced. 
When an LFO is applied to the TVF cutoff frequency, a wah effect is 
produced. When an LFO is applied to the TVA volume, a tremolo 
effect is produced.

 

*

LFO is not included in the rhythm tones (percussion instrument 
sounds).

 

Patches

 

Patches are the basic sound configurations that you play during a 
performance. Each patch can be configured by combining up to four 
tones. How the four tones are combined is determined by the 
Structure Type parameter (p. 38).

 

fig.Patch.e

 

Rhythm Sets

 

Rhythm sets are groups of a number of different percussion 
instrument sounds. Since percussion instruments generally do not 
play melodies, there is no need for a percussion instrument sound to 
be able to play a scale on the keyboard. It is, however, more 
important that as many percussion instruments as possible be 
available to you at the same time. Therefore, each key (note number) 
of a rhythm set will produce a different percussion instrument.

 

fig.RhythmSet.e

 

Each percussion instrument consists of the following four elements. 
(For details, refer to the explanations for “Tones.”)

 

WG (Wave Generator): 1–4

TVF (Time Variant Filter)

TVA (Time Variant Amplifier)

Envelope

 

Performances

 

A performance has a patch or rhythm set assigned to each of the 16 
parts, and can simultaneously handle 16 sounds. 

The Fantom-Xa has two screens: a LAYER screen and a MIXER 
screen (p. 68, p. 70).

Use the LAYER screen if you want to play two or more patches 
together (Layer) or play different patches in separate areas of the 
keyboard (Split).

Use the MIXER screen if you want to “mix” by individually 
adjusting the pan and level settings for each of the sixteen parts.

Because the Fantom-Xa sound generator can control multiple sounds 
(instruments), it is called a Multi-timbral sound generator.

 

fig.Performance.e

 

Part

 

On the Fantom-Xa, a “part” is something to which you assign a 
patch or rhythm set. Patch mode has two parts, the Pad part and the 
Keyboard part, and you can assign a patch or rhythm set to each of 
these parts. In Performance mode, each performance has sixteen 
parts, and you can assign a patch or rhythm set to each part.

Patch

Tone 4

Tone 3

Tone 2

Tone 1

WG

Pitch

Envelope

TVF

TVF 

Envelope

TVA 

Envelope

TVA

LFO 1

LFO 2

Note Number 98 (D7)

Note Number 97 (C#7)

Note Number 36 (C2)

Note Number 35 (B1)

Rhythm Tone (Percussion instrument sound)

Rhythm Set

WG

Pitch

Envelope

TVF

TVF 

Envelope

TVA 

Envelope

TVA

Performance

Part 16

Part 1

Patch/

Rhythm Set

LAYER/SPLIT
MIXER

Fantom-Xa_e.book 20 ページ ２００４年１０月２２日　金曜日　午後２時３分

Summary of Contents for Fantom-Xa









































































































































































































































































Reviews:

No comments

Related manuals for Fantom-Xa

Moog Micromoog 2090 Technical & Service Manual preview
Micromoog 2090
Brand: Moog Pages: 78
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
I-Tech YMil-K800 Quick Manual preview
YMil-K800
Brand: I-Tech Pages: 3
Kanex K166-1259-UK Quick Start preview
K166-1259-UK
Brand: Kanex Pages: 2
Hohner PSK-50 Service Manual & Parts List preview
PSK-50
Brand: Hohner Pages: 25
Korg MS2000 Owner'S Manual preview
MS2000
Brand: Korg Pages: 83
Fujitsu A26381 Operating Manual preview
A26381
Brand: Fujitsu Pages: 28
iClever IC-BK10 User Manual preview
IC-BK10
Brand: iClever Pages: 10
Pioneer ND-BT1 Owner'S Manual preview
ND-BT1
Brand: Pioneer Pages: 5
Pioneer Comfort adapter CA-D-PI.150 Quick Start Manual preview
Comfort adapter CA-D-PI.150
Brand: Pioneer Pages: 2
Pioneer ND-BC20PA Owner'S Manual preview
ND-BC20PA
Brand: Pioneer Pages: 6
Pioneer ND-BT1 Service Manual preview
ND-BT1
Brand: Pioneer Pages: 27
perixx PERIBOARD-313 User Manual preview
PERIBOARD-313
Brand: perixx Pages: 21
CrimeStopper BackStopper CA-5005 Install Manual preview
BackStopper CA-5005
Brand: CrimeStopper Pages: 4
perixx PERIBOARD-208 User Manual preview
PERIBOARD-208
Brand: perixx Pages: 22
E-Mu Vintage Keys Operation Manual preview
Vintage Keys
Brand: E-Mu Pages: 262
Dakota Digital LED Tail Lights LAT-NR350 Installation Instructions preview
LED Tail Lights LAT-NR350
Brand: Dakota Digital Pages: 3
1byone BS009 User Manual preview
BS009
Brand: 1byone Pages: 5

Brands by name

Popular brands

Load more brands