manualshive.com logo in svg

Roland Fantom-Xa, Owner'S Manual

The Roland Fantom-Xa is a versatile and powerful music workstation, offering a vast array of sounds and effects. Unlock its full potential with our comprehensive Workshop Manual, available for free download from manualshive.com. This manual covers everything you need to know to master your Fantom-Xa and explore its endless possibilities.

Share
Download
background image

 

59

Creating a Rhythm Set

 

[F1 (WG PRM)]

Parameter Group [F2 (WG)] 
Modifying Waveforms/Pitch/Pitch Envelope

 

Parameter

Value

Explanation

 

Wave Group

INT, EXP, 
SAMP, 
MSAM

Group containing the waveforms comprising the rhythm tone

 

INT:

 

 Waveforms stored in internal

 

EXP:

 

 Waveform stored in a Wave Expansion Board (SRX series) installed in EXP slots

 

SAMP:

 

 Sample waveforms

 

MSAM:

 

 Multisample waveforms

Wave Bank

PRST, USER, 
CARD

When the Wave Group is SAMP: PRST, USER, CARD
When the Wave Group is MSAM: USER, CARD

Wave No. L (Mono) 
Wave No. R

----, 1–1228

Waves comprising the rhythm tone (The upper limit will depend on the wave group.)

When in monaural mode, only the left side (L) is specified. When in stereo, the right side (R) is also 
specified.
If you want to select a left/right pair of Waves, select the left (L) Wave number, and then hold down 
[SHIFT] and press [F4 (STEREO)] to add a check mark (

 

✔

 

); the right (R) (Wave) will be recalled.

 

* When using a multisample in stereo, you must specify the same number for L and R.

 

Wave Gain

-6, 0, +6, +12

Gain (amplification) of the waveform

The value changes in 6 dB (decibel) steps—an increase of 6 dB doubles the waveform’s gain.

Wave Tempo Sync

OFF, ON

When you wish to synchronize a Phrase Loop to the clock (tempo), set this to “ON.”

 

* This is valid only when a separately sold wave expansion board is installed, and a waveform that indicates a 

tempo (BPM) is selected as the sample for a tone.

 

If a waveform from a wave expansion board is selected for the tone, turning the Wave Tempo Sync pa-
rameter “ON” will cause pitch-related settings (p. 60) and FXM-related settings (p. 59) to be ignored.
• If a sample is selected for a tone, you must first set the BPM (tempo) parameter of the sample.
• If a sample is selected for a tone, Wave Tempo Sync will require twice the normal number of voices.

 

Parameter

Value

Explanation

 

FXM Switch

OFF, ON

This sets whether FXM will be used (ON) or not (OFF).

FXM Color

1–4

How FXM will perform frequency modulation

Higher settings result in a grainier sound, while lower settings result in a more metallic sound.

FXM Depth

0–16

Depth of the modulation produced by FXM

Phrase Loop

Phrase loop refers to the repeated playback of a phrase that’s 
been pulled out of a song (e.g., by using a sampler). One 
technique involving the use of Phrase Loops is the excerpting of 
a Phrase from a pre-existing song in a certain genre, for example 
dance music, and then creating a new song with that Phrase 
used as the basic motif. This is referred to as “Break Beats.”

Realtime Time Stretch

If the wave group is “SAMP” or “MSAM,” and the Wave 
Tempo Sync parameter is turned “ON,” you can vary the 
playback speed of the waveform without affecting the pitch.

FXM

FXM (Frequency Cross Modulation) uses a specified waveform 
to apply frequency modulation to the currently selected 
waveform, creating complex overtones. This is useful for 
creating dramatic sounds or sound effects.

Fantom-Xa_e.book 59 ページ ２００４年１０月２２日　金曜日　午後２時３分

Summary of Contents for Fantom-Xa









































































































































































































































































Reviews:

No comments

Related manuals for Fantom-Xa

Xtrfy K5 Compact Manual preview
K5
Brand: Xtrfy Pages: 15
GAMDIAS HERMES E4 Quick Installation Manual preview
HERMES E4
Brand: GAMDIAS Pages: 5
Soul FITness band User Manual preview
FITness band
Brand: Soul Pages: 2
Epomaker MINI CAT64 Quick Start Manual preview
MINI CAT64
Brand: Epomaker Pages: 18
Life Fitness Advanced Workout Console User Manual preview
Advanced Workout Console
Brand: Life Fitness Pages: 51
Dave Smith Instruments Evolver Operation Manual preview
Evolver
Brand: Dave Smith Instruments Pages: 64
Brother AX-425 Parts Reference List preview
AX-425
Brand: Brother Pages: 26
JVC EXAD KD-AVX55 Instructions Manual preview
EXAD KD-AVX55
Brand: JVC Pages: 218
Sejin Electron SKR-2006 User Manual preview
SKR-2006
Brand: Sejin Electron Pages: 9
Yamaha Clavinova CLP-340 Installation Procedure preview
Clavinova CLP-340
Brand: Yamaha Pages: 2
Yamaha Clavinova CLP-330 Midi Data Format preview
Clavinova CLP-330
Brand: Yamaha Pages: 7
Yamaha Clavinova CLP-100 Owner'S Manual preview
Clavinova CLP-100
Brand: Yamaha Pages: 11
Yamaha Clavinova CLP-350 Owner'S Manual preview
Clavinova CLP-350
Brand: Yamaha Pages: 19
Yamaha CE25 Owner'S Manual preview
CE25
Brand: Yamaha Pages: 11
Yamaha Clavinova CLP-250 Owner'S Manual preview
Clavinova CLP-250
Brand: Yamaha Pages: 17
Yamaha Clavinova CLP-760 Owner'S Manual preview
Clavinova CLP-760
Brand: Yamaha Pages: 27
Yamaha Clavinova CLP-380 Data List preview
Clavinova CLP-380
Brand: Yamaha Pages: 42
Yamaha Clavinova CLP-110 Owner'S Manual preview
Clavinova CLP-110
Brand: Yamaha Pages: 46

Brands by name

Popular brands

Load more brands