Roland ColorCamm PC-12 User Manual Download

Page: 28 / 97

Part 3 Getting Ready

The ink ribbon has run out.

To Install Ink-ribbon Cartridges

Do not attempt to rewind the ribbon.

Rewinding the ink ribbon may cause it to break.

Once an ink-ribbon cartridge has been used up, you cannot turn it over and reinstall it or rewind the ink ribbon and

reuse the ink-ribbon cartridge.

Install ink-ribbon cartridges with side B facing up. If an ink cartridge is with side B facing down, the unit determines

that the ink cartridge is not installed or is upside down, and the [error] light on the PC-12 flashes.

Do not attach ink-ribbon cartridges directly in the carriage. Doing so may result in breakdown or damage.

Up to nine ink-ribbon cartridge can be installed. Printing cannot be performed if ten are installed.

Make sure that two ink-ribbon cartridges installed in a single ink-ribbon cartridge holder are vertically aligned. If

their positions are not aligned a cartridge-change error may occur.

Each ink-ribbon cartridge holder is provided with an ink-ribbon anti-insertion plate. When installing and ink-ribbon

cartridge, take up any slack in the ink ribbon and make sure that it does not catch on the plate.

Be sure to eliminate any slack in the ink ribbon.

Closing the front cover while slackness remains may damage the ribbon in the ink-ribbon cartridge.

If you're using a new ink-ribbon cartridge, remove the

stopper.

topper

If the indicator shown in the figure at right is

visible on an ink-ribbon cartridge, remove the

ink-ribbon cartridge before printing.

Also, do not install ink-ribbon cartridges in this

state.

NOTICE

Summary of Contents for ColorCamm PC-12


































































































Search results

Summary of Contents for ColorCamm PC-12

Reviews:

Related manuals for ColorCamm PC-12

Brands by name

Popular brands

Roland ColorCamm PC-12, User Manual

Search results

Summary of Contents for ColorCamm PC-12

Reviews:

Related manuals for ColorCamm PC-12

Brands by name

Popular brands