manualshive.com logo in svg

Roland ColorCamm PC-12, User Manual

Share
Download
Roland ColorCamm PC-12 User Manual Download Page 15

13

Part 1   Getting Started

PE lever

This lever is for detecting
whether media is present.

Media-ejection roller

This is the roller that ejects media.

Platen

This is a rubber plate that printing heads press down during
printing. If it becomes soiled, refer to "Part 6  Maintenance"
to clean it.

Cleaning pads
 (orange and white)

These are pads for cleaning the printing
heads. Do not try to remove them.
If they become damaged, refer to "Part 6
Maintenance" and replace them with new
ones.

Media-feed roller (metal)

This roller feeds supplied media.

"Open" sensor

This detects whether the front cover is open
or closed.

Release lever (blue)

Use this when media is jammed. Press the
lever down and pull out the media. When
you close the front cover, the lever returns
to its original position.

Carriage

This automatically picks up the required ink-
ribbon cartridge from the ink-ribbon cartridge
holders.

Printing heads

These are mounted on the carriage
and carry out printing. The printing
heads should never be touched
except when cleaning them.

Bobbin shaft

This winds the ink-ribbon
cartridge.

HP sensors (black; two locations)

These detect the type of ink-ribbon cartridge and the
reference position of the carriage.

RE sensor (black)

This detects whether the ink-
ribbon cartridge has ended.

Media auto-cutter

This severs the media from the roll.

Blade holder

This performs cutting.

Tool carriage

This is where the blade holder is installed.

Crop-mark sensor

This detects the reference position for cutting after
printing crop marks.

Summary of Contents for ColorCamm PC-12


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands