Roland ColorCamm PC-12 User Manual Download

Page: 35 / 97

Part 3 Getting Ready

Replacing the Blade

When replacing the blade, remove the blade holder from the tool carriage.

When adjusting the blade tip as well, first remove the blade holder, then adjust the blade tip.

Removing the Blade Holder

Switch off the power to the PC-12.

Turn the tool-carriage screw counterclockwise to loosen

it.

Take the blade holder out of the tool carriage.

Front-cover eject
button

Turn the tool-carriage screw clockwise to secure in place.

Close the front cover gently while supporting the left and

right sides of the cover with your hands. Make sure the

inside lock has engaged.

Insert until the collar of the blade holder lies

flush against the top of the hole.

Press the front-cover eject button, and after the inside

lock has been released, catch the front cover with your

hand and open it gently.

Not OK

Summary of Contents for ColorCamm PC-12


































































































Search results

Summary of Contents for ColorCamm PC-12

Reviews:

Related manuals for ColorCamm PC-12

Brands by name

Popular brands

Roland ColorCamm PC-12, User Manual

Search results

Summary of Contents for ColorCamm PC-12

Reviews:

Related manuals for ColorCamm PC-12

Brands by name

Popular brands