manualshive.com logo in svg

Roland ColorCamm PC-12, User Manual

Share
Download
Roland ColorCamm PC-12 User Manual Download Page 14

12

Part 1   Getting Started

1.3   Part Names and Functions

Front-cover eject button

Pressing this button opens the front cover.
You use it to open the cover when replacing
ink-ribbon cartridges or when media is
jammed. When opening the front cover,
open it gently while supporting it with your
hand.

Front cover

This cover protects the internal
mechanisms. Keep the front cover closed
when performing printing.

Front View

Interior

Media-ejection area

Printed media comes out here.

Do not open the front cover while the PC-12 is in operation.

Opening the front cover stops operation of the PC-12, but media being printed may be creased. However, it is safe to

open the front cover if you are prompted to replace the ink-ribbon cartridges during printing. In such cases there is

not danger of the media being creased.

NOTICE

Latch (blue area)

This secures ink cartridges in the ink-cartridge holder.

Ink-ribbon cartridge holder

This is the holder in which ink-ribbon
cartridges are installed. These holders are
found at five locations. You can install two
ink-ribbon cartridges in a single holder, up to
a maximum of nine ink-ribbon cartridges.
You can install cartridges of any color into
any holder.

Indicator sticker (black and silver)

This sticker is for verifying the reference position of
the carriage. It must be kept clean. If it becomes dirty,
gently wipe it clean using a dry cotton swab. When
doing this, take care not to peel off the sticker.

This describes the names of the parts of the PC-12 and how they work. Read this when you want to know more about the locations and

operation of the parts described in this manual.

Media-ejection tray

Summary of Contents for ColorCamm PC-12


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands