Rohde & Schwarz VSE-K149, User Manual

Page: 33 / 143

Configuration
R&S
®
VSE-K149
33 User Manual 1179.3315.02 ─ 01
4.3 Trigger Settings
Access : "Overview" > "Trigger" > "Trigger Source"/"Trigger In/Out"
Trigger settings determine when the input signal is measured. Note that gating is not
available for hop measurements.
External triggers from one of the [TRIGGER INPUT/OUTPUT] connectors on the con-
nected instrument are configured in a separate tab of the dialog box.
For details see R&S VSE Base Software User Manual.
For step-by-step instructions on configuring triggered measurements, see the
R&S
VSE User Manual.
Trigger Settings ............................................................................................................. 33
└ Trigger Source ................................................................................................ 33
└ Free Run ..............................................................................................34
└ External Trigger 1/2/3/4 ........................................................................ 34
└ External Channel 3 .............................................................................. 34
└ IF Power .............................................................................................. 34
└ I/Q Power .............................................................................................35
└ RF Power .............................................................................................35
└ Trigger Level .................................................................................................. 35
└ Drop-Out Time ............................................................................................... 35
└ Trigger Offset ................................................................................................. 35
└ Slope ..............................................................................................................36
└ Hysteresis ...................................................................................................... 36
└ Trigger Holdoff ............................................................................................... 36
Trigger Settings
The trigger settings define the beginning of a measurement.
Trigger Source ← Trigger Settings
Defines the trigger source. If a trigger source other than "Free Run" is set, "TRG" is
displayed in the channel bar and the trigger source is indicated.
Trigger Settings