Rohde & Schwarz VSE-K149, User Manual

Page: 45 / 143

Analysis
R&S
®
VSE-K149
45 User Manual 1179.3315.02 ─ 01
The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.
Note: Secure user mode.
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256
MB. Thus, a "memory limit reached" error can occur
although the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S
VSE base software user manual.
Remote command:
MMEMory:STORe<n>:TRACe
on page 132
5.2 Using Markers
The UWB application provides up to 16 markers in most result displays.
For more information on the available marker types and the usage, refer to the
R&S
VSE user manual.
● Configuring Markers ................................................................................................45
5.2.1 Configuring Markers
Access : "Overview" > "Result Config" > "Marker Settings"
The "Marker Settings" contain settings that apply to all markers or have a general
effect on marker functionality.
Marker Table Display ....................................................................................................45
Marker Info ................................................................................................................... 45
Marker Table Display
Defines how the marker information is displayed.
"On" Displays the marker information in a table in a separate area beneath
the diagram.
"Off" No separate marker table is displayed.
"Auto" (Default) If more than two markers are active, the marker table is dis-
played automatically.
Remote command:
DISPlay[:WINDow<n>]:MTABle
on page 133
Marker Info
Turns the marker information displayed in the diagram on and off.
Using Markers