Safety Information
R&S
®
EVSF1000
5
Getting Started 1178.6404.02 ─ 05
1
Safety Information
The product documentation helps you use the product safely and efficiently. Fol-
low the instructions provided here and in the
Chapter 1.1, "Safety Instructions"
Intended use
The R&S
EVSF1000 is a level and modulation analyzer intended for installation in
flight inspection aircraft. It performs measurements on ILS, VOR and marker bea-
con ground stations during startup, maintenance and servicing, and analyzes
ATC COM signals. The instrument’s mechanical and electrical design and high
sensitivity make it ideal for state-of-the-art flight inspection. In addition, the
R&S
EVSF1000 performs specialized, drone-based measurements on terrestrial
navigation systems.
Use the product only for its designated purpose. Observe the operating conditions
and performance limits stated in the data sheet.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In
Chapter 1.1, "Safety Instructions"
on page 5. The same information is
provided in many languages as printed "Safety Instructions". The printed
"Safety Instructions" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
1.1
Safety Instructions
Products from the Rohde
&
Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the data
Safety Instructions
