Operating Basics
R&S
®
EVSF1000
42
Getting Started 1178.6404.02 ─ 05
All characters available via this key are displayed.
2. To choose another value provided by this key, press the key again, until your
desired value is displayed.
3. With every key stroke, the next possible value of this key is displayed. If all
possible values have been displayed, the series starts with the first value
again. For information on the series, refer to
.
4. To change from capital to small letters and vice versa, press the sign key (-).
5. After entering a value, wait for 2 seconds to use the same key again.
Entering a blank
► Press the "0" key and wait 2 seconds.
Correcting an entry
1. Using the arrow keys, move the cursor to the right of the entry you want to
delete.
2. Press the [BACK] key.
The entry to the left of the cursor is deleted.
3. Enter your correction.
Completing the entry
► Press [ENTER].
For numeric values, the default unit is appended to the numeric input.
To enter a value using a different unit, select the corresponding key.
Aborting the entry
► Press the [ESC] key.
The previous entry is restored.
Manual Operation from a VNC Viewer
