Preparing for Use
R&S
®
EVSF1000
14
Getting Started 1178.6404.02 ─ 05
4.3
Choosing the Operating Site
The R&S
EVSF1000 was designed for installation in flight inspection aircraft.
Even the movement caused by transportation or mobile use does not impair its
functioning.
Specific operating conditions ensure accurate measurements and avoid damage
to the product and connected devices. For information on environmental condi-
tions such as ambient temperature and humidity, see the data sheet.
See also
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate
the product. The EMC class of the product is given in the data sheet under "Gen-
eral data".
●
Class
B equipment is suitable for use in:
– Residential environments
– Environments that are directly connected to a low-voltage supply network
that supplies residential buildings
●
Class
A equipment is intended for use in industrial environments. It can cause
radio disturbances in residential environments due to possible conducted and
radiated disturbances. It is therefore not suitable for class B environments.
If class
A equipment causes radio disturbances, take appropriate measures to
eliminate them.
4.4
Setting Up the Product
See also:
●
●
Setting Up the Product
