Operating Basics
R&S
®
EVSF1000
36
Getting Started 1178.6404.02 ─ 05
As an alternative, use the permanent instrument name to connect to the
R&S
EVSF1000. The default instrument name is a non-case-sensitive string with
the following syntax:
<Type><variant>-<serial_number>
For example, EVSF1000-123456.
For information on determining the serial number, see
6.3
Manual Operation from a VNC Viewer
You can operate the R&S
EVSF1000 manually from a connected PC using a key-
board.
You merely require a VNC viewer application, of which a variety is available on
the Internet free of charge.
Using a VNC viewer application, you simply connect to the instrument, defined by
its IP address. The display of the R&S
EVSF1000 is shown on the control PC.
The keys and other graphical user interface elements are operated using associ-
ated keyboard shortcuts on the connected keyboard.
Operation via VNC is not possible during remote control (indicated by
"Remote" in the status bar). To switch from remote control to manual opera-
tion, press [ESC].
Access to the R&S
EVSF1000 via VNC can be protected by a password. In
this case, enter
instrument
as the password in the login window.
6.3.1
Understanding the Display Information
The following figure shows a typical screen display on the R&S
EVSF1000. All
different screen elements are labeled. They are explained in more detail in the fol-
lowing sections.
Manual Operation from a VNC Viewer
