Rohde & Schwarz 1307.9002K03, Quick Start Manual

Page: 62 / 199

Preparing for Use
R&S
®
FSVA/FSV
47 Quick Start Guide 1321.3066.02 ─ 06
● Setting the Screen Colors ............................................................................... 50
● Setting the Display Power Save Function ....................................................... 53
● Selecting and Configuring Printers ..................................................................54
4.4.1 Changing the Language of the Instrument Interface
You can change the language of the R&S FSVA/FSV graphical user interface
(softkeys, dialog boxes, input settings etc.) to the any other installed language, if
available.
If you do not understand the currently used interface language, this may be
difficult. Thus, the position of the required elements in the menu is provided
in the following procedure for convenience.
1. Select the SETUP hardkey.
2. Select the "General Settings" softkey (5th from the top).
3. Select the "Language" softkey (6th from the top).
4. Select an available interface language.
All softkeys, dialog boxes, input settings etc. are displayed in the selected lan-
guage.
To change the default input language of an external keyboard, use the stan-
dard Windows operating system function (see
"Connecting a keyboard"
on page 45).
Remote command:
SYST:DISP:LANG 'en'
, see R&S FSVA/FSV User Manual
4.4.2 Selecting the Frequency Reference Signal
You can switch the reference signal for frequency processing of the
R&S
FSVA/FSV between the internal reference and an external reference signal
at 10 MHz as follows:
1. Press the SETUP key.
R&S FSVA/FSV Setup