Controlling the R&S
FSVA/FSV Remotely
R&S
®
FSVA/FSV
135
Quick Start Guide 1321.3066.02 ─ 06
13. Set the "Display the connection bar when I use the full screen" option:
● If activated, a bar showing the network address of the R&S
FSVA/FSV will
appear at the top edge of the screen. You can use this bar to reduce, mini-
mize or close the window.
● If deactivated, the only way you can return to the controller desktop from
the R&S
FSVA/FSV screen in full screen mode is to select "Disconnect"
from the "Start" menu.
8.1.3
Starting and Terminating Remote Operation
Setting up a connection to the R&S
FSVA/FSV
1. In the "Remote Desktop Connection" dialog box (see
on page 130), open the "General" tab.
2. In the "Computer" field, enter the IP address of the R&S
FSVA/FSV.
In the "User name" field, enter
instrument
to log in as an administrator, or
Nor-
mal User
to log in as a standard user.
In the "Password" field, enter
894129
.
3. To save the connection configuration for later use:
a) Select the "Save As" button.
The "Save As" dialog box is displayed.
b) Enter the name for the connection information (
*.RDP
).
4. To load an existing connection configuration:
a) Select the "Open" button.
The "Open" dialog box is displayed.
b) Select the
*.RDP
file.
5. Select the "Connect" button.
The connection is set up.
6. If the "Drives" option is activated on the "Local Resources" tab, a warning is
displayed indicating that the drives are enabled for access from the
R&S
FSVA/FSV.
Select "OK" to confirm the warning.
7. After a few moments, the R&S
FSVA/FSV screen is displayed.
Operation with Windows Remote Desktop
