manualshive.com logo in svg

Rohde & Schwarz 1307.9002K03, Quick Start Manual

Share
Download
Rohde & Schwarz 1307.9002K03 Quick Start Manual Download Page 57

Preparing for Use

R&S

®

 FSVA/FSV

42

Quick Start Guide 1321.3066.02 ─ 06

4.1.8

Switching the Instrument On and Off

Switching the instrument on

If an optional DC power supply (R&S

 

FSV-B30) or an optional battery pack

(R&S

 

FSV-B32) is used, you must switch on these devices first; see 

Chap-

ter 4.1.6, "Using an Optional DC Power Supply"

, 

on page 38 or 

Chapter 4.1.7,

"Using an Optional Battery Pack and Charger (Options R&S

 

FSV-B32/-B34)"

,

on page 39.

1. Press the AC power switch on the rear panel to position "I".

The instrument is supplied with AC power.

2. Press the ON/OFF key on the front panel.

After booting, the instrument is ready for operation. A green LED above the
ON/OFF key indicates this.

Warm-up time for OCXO

When the instrument is switched on, the OCXO requires an extended
warm-up time (see data sheet).

Switching the instrument off

1. Press the ON/OFF key on the front panel.

2. Change the AC power switch on the rear panel to position "O", or disconnect

the instrument from the AC power supply.

The R&S

 

FSVA/FSV changes into off mode.

Risk of losing data

If you switch off the running instrument using the rear panel switch or by
disconnecting the power cord, the instrument loses its current settings. Fur-
thermore, program data can be lost.
Press the ON/STANDBY key first to shut down the application properly.

 

Putting into Operation

Summary of Contents for 1307.9002K03








































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands