Basic Operations
R&S
®
FSVA/FSV
90
Quick Start Guide 1321.3066.02 ─ 06
SCPI command:
DISP:WIND:SIZE
6.4.3
Soft and Mini Soft Front Panel Display
When working with an external monitor or operating via remote control on a com-
puter, it is useful to be able to interact with the R&S
FSVA/FSV without requiring
the keypad and keys located on the front panel of the instrument. Therefore, a
"Soft Front Panel" display is available, which simulates the entire front panel of
the instrument (except for the external connectors) on the screen. You can switch
between "normal" screen display and extended display. In the extended display,
the keys and other hardware controls of the instrument are simulated on the
screen.
If you require a Soft Front Panel but do not want to lose too much space for
results in the display area, a mini soft Front Panel is available. The mini version
displays only the hardkeys in a separate window in the display area. This window
can be closed automatically after pressing a key, or remain open, as desired.
Using the Mini Front Panel, the R&S
FSVA/FSV interface is fully operable from a
monitor with a resolution of 1024x768 pixels.
Switching to soft Front Panel display
1. Press the SETUP key.
2. Press the "General Setup" softkey.
3. Press the "More" softkey.
4. Press the "Soft Front Panel" softkey.
Alternatively:
5. Press the DISPLAY key.
6. In the "Display Settings" dialog box, select "Front Panel State: On".
The extended display appears on the screen.
Changing the Display
